The Ipack kit for programming and voice call has been developed in a way that, through one call, one can test the signal and the quality of the adopted mobile telephone service. Also, through the data cable, the Ipack can be set up by a computer with a USB door without having to remove the anemometer and Ipack from the tower. 
The 5-watt Symphonie photovoltaic panels have been created for the continuous recharging of 12-volt batteries. The Symphonie panels have been developed for battery recharging even in situations of low solar radiation.
The NRG Symphonie Plus Wiring Panel functions as a entrance/protection device for the NRG Symphonie Plus anemometer (data logger). Besides providing interface between the NRG sensors and the Symphonie Anemometer, this wiring panel also prevents electrostatic discharges from damaging the device thus protecting collected data.
The equipment is used when it is necessary to install additional sensors in the anemometer (data logger). Each card allows the reading of data from more than one sensor. This signal conditioning module is fully compatible with the Symphonie Plus Anemometer (data logger).
This equipment is an excellent sensor for measuring solar radiation. Compatible with NRG Symphonie PLUS Anemometer (data logger), the pyranometer analizes direct and reflected radiation of sunlight and provides data through a small current to the anemometer.
The RH-5 uses a sensor of a polymer resistor which provides excellent linearity and sensibility with quick time response and long-term stability. The equipment also includes 1.5 m of cable for connecting to anemometer (data logger).
The NRG #BP20 sensor is ideal for the analysis of absolute barometric pressure data in any type of place under analysis, even if it presents adverse weather conditions. This product is also provided with a temperature compensation sensor, linearization and amplification of output, generating high output tension proportional to the absolute pressure of the place under analysis.
This durable sensor generates a high level of tension in output proportional to the temperature of the place under analysis. The NRG #110S is ideal for gathering data on temperature for energetic density calculations and for the monitoring of temperatures of wind potentials.
Used all over the world by the wind industry, this sensor is responsible for the analysis of wind incidence angle. The NRG #200P is manufactured with thermoplastic components and stainless steel, thus producing a gadget highly resistant to corrosion and great durability.
Wind Industry standard, this anemometer comes already calibrated from its factory, offering precise data about wind velocity. Robust, but of a simple construction, this gadget was developed with a minimum number of parts in order to offer maximum performance. The NRG #40C is certified by the National Institute of Standards and Technology of the United States of America.
The NRG Symphonie Ipack is a communication module that, when plugged to the NRG Symphonie Anemometer, transmits data collected via Internet through mobile phone technology, with a file attached to any desired e-mail address. The NRG Symphonie Ipack is available in three different types of mobile connection:
This multimedia card is used for recording data in NRG Symphonie Anemometers. Since it uses the Flash technology of data storage, this multi-media card does not need a battery in order to keep recorded data and it is resistant to the loss of data and static discharges.
The Symphonie Plus anemometer by NRG Systems is the gathering place for all concentration of data compiled from wind measurements. This anemometer is equipped with a total sum of 15 channels, out of which as many as 9 can be input channels for frequency-output sensors and as many as 6 for analogical sensors. Out of these, six channels are dedicated to the input of anemometers and 2 have been pre-configured for direction sensors. The other seven channels are of the plug-and-play type installed for the usage of generic sensors connected through the signal conditioning module (SCM Card), sold separately. The symphonie Plus kit is equipped with a Wiring Panel Kit, which can be bought separately, multi-media card with capacity for over 365 days of collected data, as well as operational manual and necessary software.
Copyright 2009 - BRASELCO - Todos os direitos reservados
